Dapco Industries, Inc Home Page
Inspection Systems Inspection Services Transducers Wheeel Probes
Inspection Systems
 Rail Inspection Vehicles
 Rail Mill Inspection
 Tube & Pipe Inspection
 Cylinder Inspection
 Military Shell  Inspection
 Eddy Current Inspection
 Custom Systems
System Platforms
 RTS-300
 RTS-400
Inspections Services
Transducers
Wheel Probes
About Dapco
Contact Us
Employment
Useful Links
Site Index
Site Search
Home Page
 
 
RTS-300 Inspection System 
User Interface

Computer

  • PC/AT-compatible (33MHz 80386 standard) for ultra-fast, real-time data processing of the collected ultrasonic data.
  • 20-inch VGA color monitor with touch-sensitive overlay.
  • 120 MByte hard-disk for storage of system setup parameters and test results; 1.44 Mbyte 3-1/2" floppy disk for software updates and archival of test results.
  • System control and data entry via either the PC/AT keyboard or by pressing areas on the touch-screen overlay.
  • Operator control interface is written in "C" and can be custom-tailored as required for different customers and applications.
  • Provisions for multi-level password protection for critical system functions.
  • Provisions for an RS-232 link to a plant or process-control computer. 
Peripherals
  • Dot-matrix parallel printer(s); minimum 300 characters per second.
  • Dual-trace oscilloscope(s) (60MHz bandwidth standard); used for monitoring
  • A-Scan signals of the ultrasonic channels, system calibration procedures, and for system troubleshooting.
  • 0 to 16 paint guns; used for marking defects at their actual, true locations on the piece being tested with an accuracy of better than 75mm (3"); also can be programmed as inputs to the PLC used to control the test cycle.
  • Optional strip-chart recorder.
Printed Reports
  • Test report for each piece tested, including a "map" of the area tested showing defects at their true locations, and a list of all defects detected with descriptive data about each defect; the test report can also be saved to the system hard disk for archival.
  • Summary statistics report listing the total number of pieces tested, accepted, rejected, and a list of the total defects detected by probe orientation and/or defect categories; statistics are maintained on the system hard disk as a data file.
  • Job summary report listing all channels and their parameters including gain settings, gates, thresholds, flaw counts, etc.
  • A listing of all "jobs" currently stored on the system hard disk. 
RTS- 300 System Overview >>
RTS- 300 System Features & Specifications >>
Top of page  - 
System Platforms -

RTS-300

  RTS-300 Overview
RTS-300 Features
RTS-300 Interface

RTS-400

RTS-400 Overview
RTS-400 Features
RTS-400 Interface
 


Send comments or suggestions about this web site to 
webmaster@dapcondt.com 

© Copyright 2000-2001. Dapco Industries, Inc. All Rights Reserved